How it works
From the fridge door to the school peg
Everything you need to know, from snapping their drawing to putting the labels on and washing them.
takes about 5 minutes to order!Make your labels
Kid's turnFirst they draw anything they like. A scribble is perfect!
-
Snap their drawing
Lay it flat in daylight and take a photo from straight above, or upload one you already have. Thick pens and crayons work best.
Grown-up tip: Fill the screen with the drawing, not the table.Photo to come A phone held above a drawing on the kitchen table -
Pick a style and add their name
Keep it exactly as drawn (free), or try a Magic style. Then choose the label colour, frame and lettering.
Leo
Video · 10 s to come Screen recording: choosing a style, colour and name in the designer -
Check the real-size preview
You see the labels at real size before you pay. Nothing is printed until you approve it.
Photo to come The real-size preview on a phone, next to a finished label
What arrives
-
Your labels come in the post
Every pack is made to order after you approve it, then posted to you with instructions for putting the labels on.
To be confirmed: what's in the envelope
Photo to come Flat lay of the opened envelope and everything in it
Put them on
Grown-up's turnThe labels are DTF (direct-to-film) transfers: printed labels you put on fabric with heat. A grown-up should always do this part. See our safety information.
What you need
- Your labels and the instructions in the pack
- Clean, dry clothes
- A hard, flat surface
To be confirmed: what to heat them with, and anything else you need
-
Get the heat ready
The instructions in the pack say what to heat the labels with and how hot.
To be confirmed: what to use, the setting, steam on or off
Video · 5 s to come Getting the heat ready, as the instructions say -
Place the label
Picture side up, on clean, dry fabric: the inside of a collar or the back neck is ideal.
Grown-up tip: Inside the collar, it stays out of sight.To be confirmed: what goes over the label while you press
Photo to come A hand placing a label inside a jumper collar -
Press
Press straight down for the time in the instructions.
To be confirmed: how long, and how firmly
Video · 15 s to come Pressing down on the label, steady hands -
Peel the film
Peel the clear film away slowly, as the instructions say.
To be confirmed: peel hot or cold
Video · 8 s to come Close-up of the film peeling away to show the label
Where they go best
- Inside collars
- Care labels
- Inside hats
- PE kit
- Coats
- Book bags and PE bags
Washing and care
- Wash inside out where you can, and follow the washing instructions in the pack.
- Check the labels now and then, especially after the first few washes.
To be confirmed: when to first wash, the wash temperature, drying and ironing
Quick questions
What can I put them on?
Clothes, PE kit, coats, hats and bags. They are heat-applied to fabric, not stickers, so they are not for water bottles, lunch boxes or other hard things.
Which fabrics should I avoid?
Check the garment's own care label first: a fabric that cannot be ironed is not a good place for a heat-applied label.
To be confirmed: the full list of fabrics to avoid
What if a label lifts or peels?
Email us a photo with your order number and we will help.
What if the labels don't match the preview?
If the print doesn't match the preview you approved, we reprint it free.
How long does delivery take?
Every pack is made to order after you approve it. The delivery page has the current times and prices.